Toilet Installation

Yeah, it sounds like a pretty straightforward DIY job, right? 🤔 But, tbh, it's not always that simple. Removing an old toilet can be a bit of a hassle, and if you're not comfortable with messing with water supply lines and wax rings, it's probably best to call a pro. Plus, they can handle any unexpected issues that might pop up.

The decision to hire a plumber or do it yourself often depends on one's personal competence with home repairs and the potential to "break the house" if something goes wrong. While DIY is possible, professionals ensure proper installation and can avoid common issues.

Replacing a toilet looks simple, but if the flange, wax seal, or leveling isn’t done correctly, it can lead to leaks and floor damage. I can remove the old unit and install the new one properly, test for leaks, and make sure everything is sealed and secure. If you’d like, I can give you a quick estimate.

Removing or installing a toilet seems simple, but it requires some knowledge. To avoid water leaks, excessive water consumption, or water seepage. Contact me and I can install the furniture you need at an affordable price.

You can do it yourself but it comes with underlying issues if not done correctly by making sure everything aligns correctly from the Flange to the wax to the bolts as to not cause further damage and make sure toilet is installed correctly, also a plumber like myself can resolve any other issues that may arise before/during or even after installation on the spot. You may reach out to me if you want a quick estimate.

The answer is you really don't need a plumber if you're just exchanging a toilet in the same area where the flange is located. First thing is shut off the water after you have drain the tank and Disconnect the supply line. Use a shop vacuum to drain any water in the toilet, that way you don't have water all over when you remove it. Disconnect the two T bolts underneath the white caps and pull straight up till it's free from the bolts. Remove old flange, Clean and install new wax flange at room temperature! Reinstall existing toilet adding new T bolts and caps. Reinstall water supply line to tank and turn on. Wait for water to get to to a full tank and flush to check for any water leaking ! Hope this helps in a nutshell:)

It’s not rocket science. Can do most stuff yourself. But if you were to do that on your own and if something goes wrong insurance company will ask who did it. And if you re not a license plumber that could be an issue with claims.

Honestly, swapping a toilet can be a quick job… in the right situation. If the old one comes off without a fight, the flange is in good shape, the floor is level, and the shut-off valve actually works, then sure — lots of homeowners handle it themselves. Where people usually run into trouble is with the surprises you only discover once the toilet is already off: • The flange is damaged, too low, or crooked • The shut-off valve drips or won’t close at all • The toilet won’t sit flat because the floor isn’t perfectly level • The wax ring doesn’t seal properly and creates a slow leak • Rusted bolts break or won’t line up with the new toilet • And the classic — tightening the bolts a little too much and cracking the base Installing a toilet looks simple, but one small mistake can leave a slow leak under the floor that goes unnoticed until the subfloor starts to rot. So no, you don’t always need a plumber — but having one do it means everything is sealed, level, and leak-free, and you’re not dealing with unpleasant surprises.

All depends on your skills and patient, and thinking about preventing any mess if the old one is realty old and all connections need inspect. If you are handy enough, shut the inlet valve and DIY.